Features

Troubleshooting


Support top

Figure

MENU

W770

Others

I want to remove pairing (registration) information on the dedicated app.

The registration information in the dedicated app is updated with that in the watch each time the watch and the smartphone are connected.
Therefore, when you connect the watch with the smartphone after removing unnecessary registration information in it, registration information in the dedicated app will be removed except for that for current connection.

!

Operation on the smartphone can remove registration information in its Bluetooth setting but cannot remove that in the dedicated app.

Removing the registration information on the watch

  1. Pull the crown out to position 1.

    2. The second hand points to 30 seconds and stops.

  2. Rotate the crown to change the mode to [TME].
  3. Pull the crown out to position 2.

    4. The second hand points the registration information currently chosen and the function hand indicates connection status (ON/OFF).

  4. Rotate the crown to choose registration information to remove.
  5. Press and hold the upper right button B for 7 seconds.

    6. The second hand turns fully around and removing is finished.

  6. Push the crown in to position 0 to finish the procedure.

    7. The second hand and function hand return to normal indication.

Connect with the smartphone.

  1. Pull the crown out to position 1.

    2. The second hand points to 30 seconds and stops.

  2. Rotate the crown to change the mode to [TME] or [L-TM].
  3. Push the crown in to position 0.
  4. Press and release the upper right button B.

    5. The second hand points "ACT" (40-second position).
    After connection, the function hand points "ON" of connection status.

Related articles