Cal. No. E67*
Refine your searchE67*
Alarm
Changing alarm setting
- Pull the crown out to position 1.
- Rotate the crown to set the mode hand to “ALM”.
- Pull the crown out to position 2.
- Press and release the upper right button B.
- Rotate the crown to set the alarm time.
- Push the crown in to position 0.
- Pull the crown out to position 1.
- Rotate the crown to set the mode hand to [TME] or [L- TM], one on which you want to use alarm.
- Push the crown in to position 0 to finish the procedure.
The second hand points to 30 seconds and stops.
The hour, minute and 24-hour hands Indicate the alarm time currently set.
!
Turn the crown so that the mode hand will point to the center of the mode name securely.
!
After indication is changed to that of the mode you chose, proceed to the next step.
The second hand indicates the current alarm setting (ON/OFF).
| Indication of the second hand | Current alarm setting |
|---|---|
 |
ON |
 |
OFF |
!
Each time you press the button, the alarm setting changes alternately.
!
The alarm time can be set in 1-minute increments. The hour, minute and 24-hour hands move synchronously.