Movement No.H24x

Online Instruction Manual

To receive signals manually

View in illustrations

  • 1

  • Check that the crown is fully
    pushed in.

  • 2

  • Press and hold the lower-right
    button for 2 seconds.

  • 3

  • The second hand points to “RX”
    and signal reception begins.

If signal reception succeeds The time is adjusted correctly.
If signal reception fails The time is not adjusted.

Once signal reception is completed, the second hand moves normally again.

It takes between about 2 and 15 minutes for signal reception to complete.

To interrupt signal reception, press and hold the lower-right button for at least 2 seconds.