Cal. No. W770 Riiiver
Refine your searchW770 Riiiver
Alarm does not work.
No alarm sound is emitted.
Below may be possible causes. Try the following remedies in sequence.
| Cause | Remedies |
|---|---|
| The power reserve is not enough. | Charge the watch. |
| The alarm setting (ALM ON/OFF) is set to “ALM OFF”. | Change the alarm setting (ALM ON/OFF) to “ALM OFF”. |
Charge the watch.
When the second hand is moving once every two seconds, alarm does not sound. The alarm setting (ALM ON/OFF) cannot be checked or changed in addition.
Charge the watch.
Change the alarm setting (ALM ON/OFF) to “ALM OFF”.
When the power reserve is enough, check the alarm setting (ALM ON/OFF) and change it.
!
The alarm time you set on the dedicated app is overridden if you set alarm on the watch after setting it on the app.
Check the alarm setting on the dedicated app if you want to make the setting on the app effective.
To check the alarm setting on the dedicated app, see “Setting functions of the watch on the dedicated app” of “How to use”
- Pull the crown out to position 1.
- Rotate the crown to change the mode to [ALM].
- Push the crown in to position 0.
- Press and release the lower right button A to set the alarm setting (ALM ON/OFF) to “ALM ON”.
- Pull the crown out to position 1.
- Rotate the crown to change the mode to [TME].
- Push the crown in to position 0 to finish the procedure.
The second hand points to 30 seconds and stops.
The hour, minute and 24-hour hands indicate the alarm time currently set and the function hand shows the alarm setting (ALM ON/OFF).
| ALM ON |  | Alarm sounds as the time set comes every day. |
|---|---|---|
| ALM OFF |  | No alarm sounds. |
!
Each time you press the button, ON/OFF of the alarm setting changes alternately.
!
You can also check the alarm setting (ALM ON/OFF) in the [TME] mode.
Press the lower right button A repeatedly to make the function hand indicate the alarm setting (ALM ON/OFF) while the crown is in position 0.
Related articles
Setting functions of the watch on the dedicated app