Cal. No. E650
Refine your searchE650
Adjusting the time and calendar manually
Adjusting the time and calendar manually
!
The calendar of this watch does not have to be adjusted manually until February 28, 2100 unless it was set incorrect or the watch was stopped. (Perpetual calendar)
- Pull the crown out to position 1.
- Rotate the crown to change the mode to any one of the following: [LON], [NYC], [CHI],[DEN] or [LAX].
- Pull the crown out to position 2.
- Press and release the lower right button A.
- Press and release the lower right button A repeatedly to change the hand/indication to be corrected.
- Rotate the crown to adjust the hand/indication.
- Repeat steps 5 and 6.
- Push the crown in to position 0 in accordance with a reliable time source to finish the procedure.
The second hand points to 30 seconds and stops.
!
You will set the time and calendar for the mode chosen here in the following steps.
The second hand points to 0 seconds and stops.
!
Each time you press the button, the target changes as follows:
Hour, minute and 24-hour → date → year and month → day of week → (back to the top)
!
The hands and indications slightly move when selected to show they become adjustable.
!
The hour, minute and 24-hour hands move synchronously.
Check AM/PM referring to the 24-hour hand.
!
Date indication changes to the next as the function hand rotates 5 times.
!
Rotating the crown quickly a few times moves the hand/indication continuously when you set time and date.
To stop the rapid movement, rotate the crown in either direction.
!
Year and month are indicated with the second hand.
To set to as the month and as the year, move the second hand to point seconds.
See “Month and year setting” when you want to set other month and year than above or to find further information.
The second hand starts moving from 0 second.
!
By setting the time and calendar for the mode chosen in step 2 correctly, those for all the rest of the following modes ([LON], [NYC], [CHI], [DEN], [LAX] and [A-TM]) are automatically set correctly.