Cal. No. F990
Refine your searchF990
Adjusting the time and calendar manually
Adjusting the time and calendar manually
You can set the time and calendar of the home time manually.
!
Execute world time setting previously.
!
The time of the local time is corrected automatically following its time zone setting after setting the home time manually.
- Pull the crown out to position 1.
- Rotate the crown to set [SET] on the mode indication to the ◀ marker.
- Pull the crown out to position 2.
- Press and hold the lower right button A for 2 seconds or more.
- Press and release the lower right button A repeatedly to change the hand/indication to be corrected.
- Rotate the crown to adjust the hand/indication.
- Repeat steps 5 and 6.
- Push the crown in to position 0 in accordance with a reliable time source.
- Pull the crown out to position 1.
- Rotate the crown to set [TME] on the mode indication to the ◀ marker.
- Push the crown in to position 0 to finish the procedure.
The second hand points to 30 seconds and stops.
!
Set the mode name you want horizontal.
The second hand stops.
The minute hand slightly moves and time and calendar become adjustable.
!
Each time you press button A, the target changes as follows:
Hour and minute → date → year and month → day → (back to the top)
!
The hands and indications slightly move when selected to show they become adjustable.
!
The hour hand, minute hand and date indication move synchronously.
Take care the time set is AM or PM.
Change of date indication shows it just became AM.
!
Date indication changes to the next as the function indication rotates 5 times.
!
When you rotate the crown quickly a few times, the hand/indication will move continuously.
To stop the rapid movement, rotate the crown in either direction.
!
Year and month are indicated with the second hand.
To set to as the month and as the year, move the second hand to point second(s).
See "Month and year setting" when you want to set other month and year than above or to find further information.
The second hand starts moving from 0 second.
!
Set the mode name you want horizontal.
The second hand returns to indicate the second.