Cal. No. H29*
Refine your searchH29*
Reference position
Checking and correcting the reference position
If time is not shown correctly even after proper reception of the time info, check whether the current reference position is correct.
- Reference position is the base position of all hands and indication to properly indicate the various functions of this watch.
- If the hands and indication do not reflect the correct reference position, the time will not be indicated accurately even if the time info is received.
Caution
Be sure to check the current reference position
and adjust it only when the position is not correct.
- Pull the crown out to position 1.
- Press and hold the button for 5 seconds or more.
- Check and correct the reference positions of them referring to the illustration.
- Pull the crown out to position 2.
- Rotate the crown to adjust the hour hand and the pictorial indication (Sun and Moon) to the correct reference position.
- Push the crown in to position 0 to finish the procedure.
The hands and indication move to their current reference position.
!
Release the button as the hands start to move.
!
Proceed to the next step when the hands and indication stop.
Correct reference positions
Hour, minute and second hands: 0 hour 00 minute 0 second
Pictorial indication (Sun and Moon): the moon is at straightly above.
| Correct | No adjustment is required. Push the crown in to position 0 to finish the procedure. |
|---|---|
| Wrong | Click here to proceed below. |
The hour hand and the pictorial indication (Sun and Moon) move slightly.
!
The hour hand and the pictorial indication (Sun and Moon) move synchronously.
The watch returns to normal indication.
Related articles
When using a specially designed crown or button