Cal. No. W770 Riiiver
Refine your searchW770 Riiiver
Alarm
Changing alarm setting
- Pull the crown out to position 1.
- Rotate the crown to change the mode to [ALM].
- Pull the crown out to position 2.
- Press and hold the lower right button A for 2 seconds or more.
- Rotate the crown to set the alarm time.
- Press and release the lower right button A to set the alarm setting (ALM ON/OFF).
- Push the crown in to position 0.
- Pull the crown out to position 1.
- Rotate the crown to change the mode to [TME].
- Push the crown in to position 0 to finish the procedure.
The second hand points to 30 seconds and stops.
The hour, minute and 24-hour hands indicate the alarm time currently set and the function hand shows the alarm setting (ALM ON/OFF).
The minute hand slightly moves and the alarm time setting becomes adjustable.
!
Check AM/PM referring to the 24-hour hand.
!
When you rotate the crown quickly a few times, the hand/indication will move continuously.
To stop the rapid movement, rotate the crown in either direction.
| ALM ON |  | Alarm sounds as the time set comes every day. |
|---|---|---|
| ALM OFF |  | No alarm sounds. |
!
Each time you press the lower right button A, ON/OFF switches alternately.