Cal. No. F990
Refine your searchF990
All Reset
Resetting the watch - All Reset
When the watch does not work properly, you can reset all the settings.
If the power reserve is insufficient, charge the watch first.
The setting values after All Reset
| Calendar | January of leap year (5-second position) |
|---|---|
| World time | Time zone (offset) 0 (LON), London |
| Reception result | NO |
| Summer time | SMT OFF at all time zones |
| Alarm setting | ALM OFF |
| Alarm time | 0:00 AM |
| Leap second setting | No change after All Reset |
| Rollover number setting |
Resetting the watch - All Reset
- Pull the crown out to position 1.
- Rotate the crown to set [CHR] on the mode indication to the ◀ marker.
- Pull the crown out to position 2.
- Press and hold buttons A and B at the same time for 4 seconds or more and release them.
The second hand points to 30 seconds and stops.
!
Set the mode name you want horizontal.
Alarm sounds as the buttons are released and the hands move to their current reference position.
After All Reset, proceed to step 6 of “Check and correct the reference position” to adjust the reference position.
Adjust the time and calendar after that.
Related articles
Checking and correcting the reference position