All Reset

Resetting the watch - All Reset

When the watch does not work properly, you can reset all the settings.
If the power reserve is insufficient, charge the watch first.

The setting values after All Reset

Time/calendarTime and calendar of the [LON] mode: January 1, Sunday of leap year
Summer timeSMT OFF for all the modes
Automatic summer time switching function: On
Alarm time: 0:00 AM
Reception result indicationNO

Resetting the watch - All Reset

  1. Pull the crown out to position 1.
  2. The second hand points to 30 seconds and stops.

  3. Rotate the crown to change the mode to [CHR].
  4. Pull the crown out to position 2.
  5. The hands and indication move to the current reference positions stored in memory and stop.


    Proceed to the next step when the hands and indication stop.

  6. Press and release both the lower right button A and upper right button B simultaneously.
  7. As you release the buttons, the alarm sounds and all reset is executed.

After All Reset, proceed to step 5 of “Checking and correcting the reference position” and adjust the reference position.
After that, execute world time setting and adjustment of time and calendar.

Related articles

Checking and correcting the reference position Receiving the time signal manually (On demand reception) Adjusting the time and calendar manually When using a specially designed crown or button

Copyright © 2020 CITIZEN WATCH Co. Ltd. All rights reserved.